All posts by simiecoind

Abstract:

The paper presents the influence of pH on the dissolved organic carbon in industrial waste samples as a decision indicator in determining the hazardousness of the waste at storage according to the environmental legislation. Waste storage is a common method of management and is realizing according to GO 95/2005, which requires limit concentrations of the indicators analyzed according to each type of deposit (inert, non-hazardous, and hazardous). For the analysis of the dissolved organic carbon, 6 samples of waste from different sectors of activity were subjected to the leaching test and the eluate was analyzed on a multi N/C 3100 equipment at both the pH of the waste, itself and between 7.5 and 8 pH units. From the results obtained it is found that the modification of the pH leads to significant variations in the concentration of the dissolved organic carbon, variations which can provide essential information for the subsequent management of the waste.

[Read entire document here]

Abstract:

A methodology for quickly and easy determination the quality of pellets offered on the market is developed on the basis of “theory of graphs”. The pellet quality assessment is performed in two ways – by direct control (non-destructive measurements) and by combustion. The following pellets parameters are determined at the direct control stage: friability, homogeneity, presence of dark stains and moisture content. The experimental measurement of following parameters of the combustion process is carried out at the stage of pellet burning assessment under real conditions: temperature in the combustion chamber, time for complete combustion of the pellets and the amount of ash after pellets combustion. The calorific value of the tested pellets is determined on the basis of the experimentally obtained parameters of the combustion process. The the obtained parameters values are statistically processed according to the described in the paper equations at the next stage. Then the results for the investigated pellet parameters are compared with the normative values. The proposed methodology could be calibrated by experimental determining the calorific value of investigated pellets by a calorimeter. Practical application of this methodology is that by not so complicated measurements and calculations the required amount of pellets for heating a building with a certain energy consumption for heating season could be determined.

[Read entire document here]

Abstract:

The main objective of the study, presented in the article, is to review the possible methods of final recovery of End-of-Life Tires (EOLT). Applied methods of the end-use of EOLT used in Republic of Bulgaria and in some other countries in the European Union are presented and commented in the paper. Also the end-use of EOLT waste criteria is discussed. The possibilities for post-recovery including recycling of the waste generated by the tire recovery process have been explored. The application of the identified methods in Republic of Bulgaria and other European Union Member States have been analyzed and assessed.

[Read entire document here]

Abstract:

The most commonly used insulating liquid in transformers is mineral oil. Special synthetic applications such as silicone, ester, perchloroethene, etc. are used today in special applications, with different characteristics, very low or nonexistent toxicity to mineral oils used in transformers. On the other hand, they have a much better biodegradability than mineral oils in both aerobic and anaerobic conditions. But they cannot directly replace the mineral oil in operation or in repaired units. They have dielectric properties and good heat transfer but have limited their use to special transformers due to the relatively high cost and availability.

[Read entire document here]

Abstract:

Climatic conditions from areas where vine is cultivated or intended to be cultivated are essential and important to be acknowledged especially in the context of climatic changes that have taken place during the last 50 years. In this regard, prevention solutions are recommended to be implemented as well as solutions that decrease the damages caused by climatic changes or other stress factors. Among these solutions we mention the reorientation of vine areas, planting shelter-belts in areas and regions exposed to high intensity winds, reconsidering the structure of viticultural varieties or selecting the cultivated vine varieties.

[Read entire document here]

Abstract:

The publication deals with the development of a structural model of payment schemes for ecosystem services (PES) oriented to usage of forests for water, soil and microclimate quality improvement. Proposed structural model is built on the Meta analyses base of more than 50 PES schemes worldwide. The proposed structural model has three top down levels – groups of categories, categories and attributes. There are seven groups of categories, 17 categories and more than 120 attributes. The structured information about studied PES schemes is stored in a warehouse managed by unique web platform created by the authors. An important part presented study is the developed generic use case of PES schemes with definition of seven participated actors.

[Read entire document here]

Abstract:

For environment protection in the European Union (EU) it is very important the construction waste to be recycled and reused. The potential for the construction waste recycling and reuse is high, as their components have high cost. There is an opportunity for re-use of such materials in road construction, for drainage systems, for outdoor sports grounds and other construction sites. In 2012 a regulation on the management of construction waste and on the use of recycled building materials was adopted in Bulgaria, aiming to introduce a new model for the management of construction waste. This would guarantee: creation of favorable legislative and economic conditions for implementation of technologies ensuring the achievement of recycling and recovery targets but which are also financially viable in line with the country’s incomes; identifying the persons responsible for covering the costs of building waste management and achieving the recycling and recovery targets; creating conditions for the production and marketing of materials from recycling of construction waste at a price that is competitive with the same new raw materials used in construction. The main effect expected from this normative document is to contribute to Bulgaria’s development towards European trends, 

[Read entire document here]

Abstract:

Particulates generated by anthropogenic activities are found in the ambient air in varying amounts, in a wide range of sizes and in a wide variety of chemical composition. The concentration of particulates at one site, as well as their composition, are influenced by their origin and dispersion factors. By chemical and dimensional analysis of particulates in an area, we can draw preliminary conclusions about the origin and level of pollution in that area. This paper presents the results obtained by concomitant monitoring of particulates emissions and the concentration of particulate matter in ambient air in the adjacent area of an industrial plant. The result of the measurements obtained and their correlation with the specific conditions during the monitoring period lead us to the conclusion that the concentration of particulate matter at the emission sources directly influences the concentrations of particulate matter in the neighbouring area.

[Read entire document here]

Abstract:

Lead, a high-risk environmental pollutant and extensively used by industry, is one of the most widely outspread toxic metal today. Lead toxicity is a public health problem both for the children and for the adults. Lead does not have any useful functions in the body, instead it produces only harmful effects once it gets into the body. In this study, we investigated the toxicity of lead in an animal model of non-acute exposure. Experimental groups received treatment of aqueous solution lead acetate at different doses and time of administration. Toxic effects of lead were investigated on haematological and behaviour of treated rats. We noticed the disturbances of both haematological parameters and behaviour. Our results indicated that non-acute exposure to lead induced toxic effects in the blood, and central nervous system of adult Wistar rats.

[Read entire document here]

Abstract:

The main activity of the studied company is treatment and coating of metals (galvanizing plating), trapping and treatment of waste water. Galvanizing consists in creating a superficial diffusion layer of iron alloy. BATs (Best Available Techniques) do not necessarily mean the most advanced technique available, but the best technique from an economic point of view for a particular installation. Results of the research relate to compliance of the industrial water treatment plant to BAT best available techniques, in order to minimize pollutants discharged into the sewerage network. Furthermore, the current paper identifies possible dysfunctional problems of the galvanizing plant and of the sewage treatment plant and makes suggestions of remedies for possible technical and organizational problems.

[Read entire document here]

Abstract:

The waste management strategies released and applied in EU countries endeavor to achieve the improvement of natural resources use and efficiency towards reducing the air, water and soil pollution due to improper waste disposal or treatment. This paper is a blueprint on waste generation and waste management Policies, Laws and strategies existing in Romania compared to EU countries. According to Directive 2008/98/EC Waste, is defined as “any substance or object which the holder discards or intends or is required to discard”. One of the main principles of waste management strategies is to be able to process the waste generated towards reaching as up as possible the Waste Management Hierarchy. From the circular economy concept point of view, the incorrect treatment of waste is representing an important loss of resources, both in raw materials and energy and therefore recycling and reuse should reach a superior level every year.

[Read entire document here]